User Manual

Connect your EchoCold device to WiFi and start monitoring your cold chain operations

WiFi Configuration (AP Mode)

Follow these steps to connect your EchoCold device to your facility's network

1

Power On Device

Plug in your EchoCold Device using the USB cable. The LED will flash blue indicating it's ready for configuration.

Device Power Connection Diagram

2

Connect to Device Network

On your phone or PC, open WiFi settings and search for the network named:

EchoCold-Setup

No password required for initial setup

WiFi Selection Screenshot

3

Configure Credentials

Open your web browser and navigate to:

http://192.168.4.1

Enter your facility's WiFi credentials:

Network SSID: Your WiFi network name
Password: Your WiFi password
Device ID: Unique identifier for this unit

Configuration Portal Screenshot

4

Finish Setup

Click "Save & Connect". The device will:

  1. Save your configuration to flash memory
  2. Reboot automatically (LED turns off briefly)
  3. Connect to your facility's WiFi
  4. Begin transmitting data to the Cloud

Success!

When the LED shows solid green, your device is online and transmitting.

Troubleshooting